How To Use Windproof Lighters

　　The flame spout of windproof lighters is made of steel wire. When the flame burns, the steel wire will burn red and hot. There will be a lot of heat left on the steel wire, which can support combustion, so even if the wind blows, it is difficult to blow out the windproof lighters. This article is about the use of windproof lighters, you can learn about it together.

　　1. Adjust the flame

　　1. When in use, the flame height will change to a certain extent with the reduction of the gas content of the product and the change of the ambient temperature. This is a normal phenomenon, and you can adjust the flame height appropriately;

　　windproof lighters

　　2. When in use, the normal flame height should be adjusted: windproof lighters are 1.5-2.5 cm;

　　3. If you need to adjust the height of the flame, please use a flat-head screwdriver to align it with the groove of the flame regulator; if the lighter itself has an adjustment ring, you can directly adjust it with your fingers.

　　Turn clockwise in the direction of the (-) arrow to lower the flame height; turn in the direction of the (+) arrow in the counterclockwise direction to increase the flame height. Note: Rotate counterclockwise, no more than half a turn based on normal flame height. Otherwise, the product may be damaged;